Upgradeable PDU Instruction Manual
32
© 2017 Geist
GM1157
address and resetting user account information.
and
Flip the display 180 degrees. Both buttons must be pressed at the
same time.
and
Display the unit's primary IPv4 address. Both buttons must be pressed
at the same time.
x
3
Enable VLC* mode by pressing the center
button three times within 2
seconds. Pressing the button while VLC mode is active will return the
unit to the standard Current display.
*See VLC section of manual for more information on this feature.
NOTE
Display Button functionality may vary based on unit configuration
.
Enhanced Monitored
The Enhanced Monitored Geist Upgradable PDU is a more advanced option for data centers that need
full remote monitoring, alarms and remote sensors. It is built with the IMD-02E module, which provides
dual Ethernet ports, a local display and a RJ12 port for remote sensors.
Highlighted in Red above.
6.
Remote Sensor Port :
RJ12 port for connecting a Geist plug-and-play remote digital sensor (sold
separately). Each digital sensor has a unique serial number and is automatically discovered. GU
Enhanced Monitored PDUs support one sensor at a time. The optional Geist A2D Converter can be
added to support analog sensing.
NOTE
When changing sensors the old sensor must be deleted before the
new sensor will be discovered.
7.
Proprietary Connectivity :
RJ12 port for future expansion.
Rapid Spanning Tree Protocol (RSTP)
Geist Upgradable monitored devices, built with the IMD-02E include two Ethernet ports which work
together as an internal Ethernet bridge. One of these ports can be used to connect the IMD to an
existing network, or both ports can be used at the same time to connect one IMD to another in a daisy-
chain configuration.
