5
www.geiger.de
EN
EN
11.
Battery replacement
If the display doesn‘t light up if actuating one of the control keys, the batteries need to be
replaced. In this case please remove the wall transmitter out of the holder. Make sure that you
use the same type of battery (CR2032). Then put the wall transmitter back on its holder.
12.
Assembly
Three options are available for assembling the bottom part
of the wall transmitter:
1
Adhesive fixing with adhesive pad (encl.)
2
Wall mounting with 2 screws (dowels and screws
enclosed)
3
Screw mounting on a flush mounting box
13. Technical data
Transmitting frequency
433,92 MHz
Temperature range
between -0°C and +60°C
Dimensions
81 x 81 x 14,3 mm
Power supply
3V Typ CR2032
Subject to technical modifications
D E
V
geprüfte
Sicherheit
14.
Declaration of conformity
The wall transmitter complies with the relevant technical regulations enacted by the European
Community. It bears the CE mark and is authorised for use in all EU member states and in
Switzerland without any need of prior registration.
To learn more about the EC Declaration of Conformity pertaining to this wall transmitter, please
visit our website at: www.geiger.de
15. Disposal
Recycling of packaging materials
In the interest of environmental protection, please contact your local government’s recycling or
solid waste management department to learn more about the services it provides.
Waste disposal of electric and electronic equipment.
Electronic equipment or batteries cannot be discarded along with the normal household waste.
Keep for more information on the recycling and disposal methods envisaged by the local
regulations in your area.
