![background image](http://html1.mh-extra.com/html/gehl/ctl60/ctl60_operators-manual_2205858122.webp)
120
MAINTENANCE
Every 1000 Hours
Cleaning the Engine Cooling
System
WARNING
¡
¡
¡
¡
¡
Stop the engine and allow the machine
to cool down before performing
maintenance.
• The engine, muffler, radiator and
many other parts of the machine are
hot directly after the engine is
stopped. Touching these parts will
cause burns.
• The engine coolant is also hot and
under high pressure. Be careful when
loosening caps and plugs. Working
on the machine under these
conditions could result in burns or
injuries due to the hot coolant
spurting out.
¡
¡
¡
¡
¡
If maintenance must be performed with
the engine running, always work as a
two-person team with one person
sitting in the operator’s seat while the
other works on the machine.
¡
¡
¡
¡
¡
When performing maintenance, be
sure to keep your body and clothing
away from moving parts.
¡
¡
¡
¡
¡
Standing at the back of the machine
while the engine is running is extremely
dangerous, as the machine could move
suddenly. Never stand at the back of
the machine while the engine is
running.
¡
¡
¡
¡
¡
Do not remove the radiator cap or drain
plugs when the coolant is hot. Stop the
engine, let the engine and radiator cool
and loosen the radiator cap or drain
plugs slowly.
1. Open the rear door and remove the cover (5).
2. Gradually loosen the radiator cap (3) to
release the internal pressure, then remove.
3. Place a pan for catching the spent coolant
under the drain plug (4), then loosen the
drain plug (4) and drain the coolant.
4. Tighten the drain plug (4), then add a little
cleaning agent and tap water to the
radiator until it is full. Take your time doing
this.
Follow the manufacturer’s instructions
when using the cleaning agent.
5. Run the engine at a low idle for about 30
minutes. For the first 5 minutes after
starting it, pay attention to the level of the
cleaning fluid, and add tap water if the level
drops.
6. Stop the engine and drain the cleaning
fluid.
7. Tighten the drain plug (4), add tap water,
run the engine at a low idle for about 10
minutes, then stop the engine and drain
the water.
Clean repeatedly until the drained water
is clear.
2
3
T7G004
1
L
H
T7G022
4
5
Summary of Contents for CTL60
