20
12.1 Flexible joint between gun housing and paint container (Fig. 4 and 5)
To spray upwards whilst keeping the paint container vertical, use the flexible joint (Fig. 4, item
201) available as a special accessory.
Flexible joint installation order:
1)
First, withdraw the angle-piece (Fig. 3, item 327) from the paint container lid and
dismantle the pressure hose (Fig. 3, item 328). Then pull the pressure hose off the spray gun
(Fig. 3, item 301) and replace it with the longer pressure hose (Figs. 4 and 5, item 208).
2)
Unscrew the paint container (Fig. 3, item 325) and the brass adapter (Fig. 3, item 323),
using the nozzle spanner. Remove the O-Ring (Fig. 3, item 324) from the adapter.
3)
Remove the hexagonal nut (Fig. 5, item 206) and the O-Ring (Figs. 4 and 5, item 207)
from the flexible joint. Screw the hexagonal nut back on to the flexible joint thread. Then add the
O – Ring (Fig. 3, item 324) and screw the flexible joint together with hexagonal nut and O-ring
on to the gun body. Align flexible joint and tighten hexagonal nut (Fig. 5, item 206). Place the
other O – Ring (Fig. 5, item 207) on the upper thread of the flexible joint, then screw the paint
container on again and tighten.
4)
Finally, screw the angle-piece (Fig. 3, item 327) into the paint container lid, attach the
longer pressure hose (Fig. 4, item 208) to the spray gun housing and the angle-piece.
Figure 4
Figure 5
Attention!
The wing-nut (Fig. 5, item 205) should be tightened only
gently, so that the container still be moved.
Summary of Contents for PN 1
Page 20: ...Figure 3 18...
