DIMENSIONS
Dimensions in mm, (inc)
(*) See installation notes
*Apply thermoconductive
paste
Raise the guard to access the
fastening hole or the terminals
Repetitive overcurrent t=1 s:
≤
35Arms
Non-repetitive overcurrent t=20ms:200Ap
Current drop at nominal voltage and
frequencies:
≤
8mArms
I
2
t for fusing t=1-10ms:
≤
200A
2
s
Critical dl/dt:
≥
100A/µs
Voltage drop at nominal current:
≤
1,45Vrms
Critical dV/dt off-state:
≥
1000V/µs
Ith = 15A
GQ - 25 -
Nominal current :
AC51: 25Arms; AC53: 5Arms
Min load current: 0,3Arms
Repetitive overcurrent t=1 s:
≤
60Arms
Non-repetitive overcurrent t=20ms: 300Ap
Current drop at nominal voltage and
frequencies:
≤
8 mArms
I
2
t for fusing t=1-10ms:
≤
450A
2
s
Critical dl/dt:
≥
100A/µs
Voltage drop at nominal current:
≤
1,45Vrms
Critical dV/dt off-state:
≥
1000V/µs
Ith = 25A
GQ - 50 -
Nominal current :
AC51: 50Arms; AC53: 15Arms
Min load current: 0,3Arms
Repetitive overcurrent t=1 s:
≤
125Arms
Non-repetitive overcurrent t=20ms: 600Ap
Current drop at nominal voltage and
frequencies:
≤
8mArms
I
2
t for fusing t=1-10ms:
≤
1800A
2
s
Critical dl/dt:
≥
100A/µs
Voltage drop at nominal current:
≤
1,35Vrms
Critical dV/dt off-state:
≥
1000V/µs
Ith = 50A
GQ - 90 -
Nominal current
AC51: 90Arms; AC53: 20Arms
Min load current: 0,5Arms
Repetitive overcurrent t=1 s:
≤
150Arms
Non-repetitive overcurrent t=20ms: 1500 Ap
Current drop at nominal voltage and
frequencies:
≤
10mArms
I
2
t for fusing t=1-10ms:
≤
11200A
2
s
Critical dl/dt:
≥
100A/µs
Voltage drop at nominal current:
≤
1,35Vrms
Critical dV/dt off-state:
≥
1000V/µs
Ith = 90A
(*) Only versions: GQ-XX-24-X-1
GQ-XX-48-X-1
Insulation
Nominal insulation voltage
Input/output::
≥
4000 Vac
Nominal insulation voltage
Output/case:
≥
2500 Vac
Insulation resistance
Input/output:
≥
10
10
Ω
Insulation resistance
Output/case:
≥
10
10
Ω
Insulation capacity Input/Output:
≤
8pF
Insulation capacity Output/case:
≤
100pF
Ambient conditions
• Ambient temeparure: -25...+80°C
• Storage Temperature: -55...+100°C
• Maximum relative humidity: 50% a 40°C
• Maximum installation height: 2000 slm
• Pollution level: 3
Thermal features
GQ - 15 - / GQ - 25 -
Junction Temperature:
≤
125°C
Rth junction/case:
≤
1,25 K/W
Rth junction/ambient:
≤
12 K/W
GQ - 50 -
Junction Temperature:
≤
125°C
Rth junction/case:
≤
0,65 K/W
Rth junction/ambient:
≤
12 K/W
GQ - 90 -
Junction Temperature:
≤
125°C
Rth junction/case:
≤
0,3 K/W
Rth junction/ambient:
≤
12 K/W
Solid State Relay Dissipated Power
Calculation
Single phase state relay
P
d
GQ .. 15/25 = 1,45 . Irms [W]
P
d
GQ .. 50/90 = 1,35 . Irms [W]
IRMS = single-phase load current
Heatsink Thermal Resistance
Calculation
Rth = (90°C - T.amb. max) / P
d
where P
d
= dissipated power
Max. amb. T = max air temperature
inside the electrical cabinet.
Use a heatsink with thermal resistance
inferior to the calculated one (Rth).
Installation notes
The device must be protected by a high
speed fuse (accessory).
Applications with power solid state relays
must also have a switch to isolate the
power line.
Protect the solid state relay against over-
heating by using a heatsink (accessory).
The heatsink must be sized according to
room temperature and load current (see
technical data).
Heatsink installation procedure:
