gefran GFX-OP, User Manual

Page: 13 / 52

13
4 • PROGRAMMING and CONFIGURATION MENU
INFO
Serial communication
SEr
InP
Out
PAS = 99
Pro
Lin
Input settings
Output settings
Hardware configuration
Input linearization
NO
Keep the F key
pressed to scroll
the menus.
Release the F key
to select the
displayed menu.
Press the F key to
access the
parameters.
Keep the F key
pressed to exit
any menu.
Keep F + Auto/Man
keys pressed for 2
sec. on any menu
to go immediately
to level 1 display
You can
immediately go to
the previous
parameter by
pressing the
Auto/Man + F keys
on any menu.
PAS
Hrd
Custom menu
Password
Protection code
Information display
CFG
sp
SP.1
SP.2
al.1
If Inc, Dec, F keys are not pressed within 15 sec,
display returns automatically to P.V. value
P.V.
Process variable
Local Setpoint
LEVEL 1 MENU
Setpoint 1
Setpoint 2
Alarm point 1 (scale points)
-
spa
Active Setpoint
SP.rS Remote Setpoint
not memorized in eeprom
I.tA1
Ammeter input value
I.tU1
Voltmetric input value
I.tA2
Ammeter input value
I.tA3
Ammeter input value
I.tU2
Voltmetric input value
I.tU3
Voltmetric input value
N.B.: Once a particular configuration is entered, all unnecessary parameters are no longer displayed
The displayed parameters depend on the firmware release of the selected Geflex.
For the list and meaning of parameters shown in different menus, please refer to the Geflex user manual.
U.CA
Potentiometer
input calibration
al.2
al.3
a.xb1
Alarm point 3 (scale points)
Alarm point 4 (scale points)
Heater break alarm point
(scale points of ammeter input)
Alarm point 2 (scale points)
al.4
a.xb2 Heater break alarm point
(scale points of ammeter input)
a.xb3
0V.P
Heater break alarm point
(scale points of ammeter input)
Control output value (+Heat / -Cool)
(parameter settable only if Geflex is in
manual mode [MAN LED on])
The automatic return to PV/SV display is
disabled when “manual valve control” is active