11
80543B_MHW_GF_VEDO-TL_0109_ENG
If protection against water is necessary, it is essential to do as follows when installing the panel:
•
make the edges of the hole for the panel perfectly smooth and flat
•
tighten each fastening screw (or nut) until the corner of the frame touches the panel
•
the panel hole must have the dimensions specified in this manual
The GF_VEDO TL terminals also have an O-Ring inserted at the rear of the display frames, as shown in Figure 9.
Fig. 9 - O-Ring on GF_VEDO TL terminals
Cleaning the device
Clean the device only with a soft cloth and non-abrasive neutral soap. Do not use solvents.