GEFRAN-SIEI ARTDriveG EXP-D6A1R1-AGy, Instruction Manual

Page: 12 / 16

—————— EXP-D6A1R1-AGy ——————
12
English
Chapter 5 - LEDs
There are 8 LEDs. Their function is to state the functioning condition of the
digital I/Os. The following table describes the LED signals.
LED name
IN 1
IN 2
IN 3
IN 4
OUT 1
OUT 2
NO
NC
tab 5g
Active digital output 2.
Normally open contact of the active relay.
Signal meaning
Active digital input 1.
Normally closed contact of the active relay.
Active digital input 2.
Active digital input 3.
Active digital input 4.
Active digital output 1.
Chapter 6 - Additional functions
The card is supplied with the XOPT connector. Its function is foreseen only
for future developments.
Chapter 7 - Option selection via AGy
The AGy inverter allows to connect two options.
The options are enabled via the
I.700 and I.701 parameters. The EXP-
D6A1R1-AGY card has to be configured exclusively as option 1 with the
I.700 parameter. It is enabled by writing the “2” code of the I.700 parameter.
See the AGy manual for further information.
Chapter 8 - Technical features
8.1 General features
Card name __________________________ EXP-D6A1R1-AGY
Card type ___________________________ Various I/O option for AGy
Compatible regulation card _____________ R AGY or R AGY2
Interface with AGy regulation ____________ Serial sinchronous
Period of the communication package with
regulation ___________________________ 10ms
Regulation power supply _______________ 24V
8.2 Digital inputs
Input type ___________________________ voltage opto-isolated
Input number ________________________ 4 with one common
Connection _________________________ PNP or NPN common for each group
Mechanics __________________________ extractable terminal which can be
connected to a section of 0.14...1.5 mm 2
Input voltage ________________________ 15 ... 30V DC
Input current _________________________ 4.5 ... 9mA
Hw delay time on the rise edge __________ 30ms
Hw delay time on the drop wire leading edge 60ms