background image

7

HIGH-DEFINITION SCALER CONFIGURATION

Entering the Menu System

Pressing the Menu button on the included RMT-SR-IR remote control will display the 
GUI (graphical user interface) for adjustment options.

The GUI is overlaid onto the outgoing video to the display. Therefore, the selected 
source must be outputting a compatible resolution for viewing on the display. If video 
is not visible on the display, the GUI will also fail to be displayed. To correct this, 
please follow the steps below.

Verify that the source is on and outputting a video signal.

1. 

Verify that the RMT-SR-IR remote channel is in the default position (page 13).

2. 

Verify that the 

3. High-Defi nition Scaler is selected to the chosen source.

Press the Output button on the RMT-SR-IR remote control to cycle through 

4. 

output resolutions until video is displayed.

Navigation

Use the directional buttons to navigate the menu system. Press the OK button to 
enter a sub category and to select a menu item for adjustment. Press the EXIT 
button to return to the previous menu. Use the LEFT and RIGHT buttons to adjust 
selected options. Pressing the EXIT button while in the main menu will exit out of the 
menu system.

MAIN MENU

The following are the main menu options. Use the UP and DOWN buttons to choose 
your desired subcategory and press OK to enter it.  

VIDEO
COLOR
OUTPUT
OSD
INFORMATION

VIDEO

Picture Mode

Preset and user confi gurable settings for different viewing scenarios. Preset settings 
will not allow user adjustment. Only the USER option will allow customized video 
settings. The USER settings are saved.

Options:

Standard - useful for general content 

• 

Movie - useful for dimly lit environments

• 

Vivid - useful for accentuating colors for a more vibrant image

• 

User - user confi gurable settings

• 

NOTE: 

User settings are saved. However, user settings for the digital inputs (HDMI 

1 and 2) are linked and user settings for the analog inputs (Composite, S-Video, and 
Component) are linked. i.e. adjustments to video user settings made on HDMI 1 will 
be refl ected in HDMI 2.

Summary of Contents for GTV-HIDEFS


















Reviews: