6
How to Connect the HDMI To Composite/S-Video Scaler
1. Connect the HDMI source to the HDMI To Composite/S-Video Scaler’s HDMI
input using the supplied HDMI cable.
2. Connect the display to the HDMI To Composite/S-Video Scaler’s composite
or s-video outputs using user supplied cables.
3. Connect the HDMI To Composite/S-Video Scaler’s stereo analog audio
output to the display or audio Receiver. Optionally, you can connect the
digital coaxial output to the display or an audio Receiver.
4. Ensure that the proper video output format is set using the NTSC/PAL format
switch on the rear panel of the unit. Please consult your television’s manual
for the proper input format type.
5. Connect the included 5V DC power supply to the HDMI To Composite/S-
Video Scaler.
6. Once you have a video image on-screen, use the under/over scan switch to
adjust the image’s size.
NOTE:
The HDMI To Composite/S-Video Scaler will cross convert between some
digital audio formats. Both the digital and analog audio outputs are active at all
times. The HDMI To Composite/S-Video Scaler will not, however, down-mix multi-
channel digital audio formats to 2 channel analog stereo. Please see the chart
below for supported input and output formats.
INPUT
►
HDMI
MULTICHANNEL
LPCM
HDMI
2 CHANNEL
LPCM
HDMI
DOLBY DIGITAL
& DTS
OUTPUT
▼
DIGITAL
COAXIAL
YES
*2 CHANNEL
YES
YES
ANALOG
STEREO
MINI-JACK
NO
YES
NO
*2 channels are the front right and front left speakers. It will not down-mix multi-channel to 2 channel audio
CONNECTING AND OPERATING INSTRUCTIONS
