5
1
Stereo Analog Audio Output
2 RCA stereo analog audio outputs. Connects to the display or a audio
Receiver. Only 2 channel LPCM from the HDMI input can be passed to these
outputs. Multi-channel bit-stream such as Dolby Digital will not be passed to this
output.
2
Composite Analog Video Output
RCA composite video output. Connect to a composite input on a television. 480i
and 576i are the only resolution output options.
3
S-Video Analog Video Output
S-Video video output. Connect to a s-video input on a television. 480i and 576i
are the only resolution output options.
4 Digital
Audio
Output
Coaxial digital audio output. Connects to the display or a audio Receiver. 2
channel LPCM and multi-channel bitstream can be output from this connector.
5
Video Format Output Switch
Switch between NTSC (60Hz) and PAL (50Hz) output. Please ensure that you
use the proper output for you television. Using the wrong format will result in a
unrecognizable picture and may damage your television.
6
Under/Over Scan Switch
Most analog television sets were designed to accept an over-scanned signal.
If the resulting video signal displays a black border around the edges, use
the over-scan option. If the resulting video signal is stretched far beyond the
television’s edge, use the under-scan option.
7 HDMI
Input
Connect the HDMI source to this input connector. This will accept both video
and audio through the HDMI connector.
8
5V DC Power Supply Input
Connect the included 5V DC power supply to this input.
9 Power
LED
This LED will become active once the included power supply is properly
connected.
PANEL DESCRIPTIONS
