5
1
HDMI Output Ports 1-8
Connect HDMI-compliant display device(s) to any of these output ports.
2
Audio Channel Selection Switch
This switch will modify the EDID to specify the number of supported audio
channels when using the INTERNAL EDID mode. This setting will not affect the
EDID information when using the EXTERNAL EDID mode.
3
EDID Mode Selection Switch
This switch will control the location of the EDID that will be sent to the source
device. The options are EXTERNAL and INTERNAL. Please see pages 7-10 for
more information.
4
USB Service Port
Used for upgrading the Splitter’s HDMI fi rmware. This feature is currently
in development. Future versions of this manual will include a procedure for
upgrading the fi rmware.
5
HDMI Input Port
Connect an HDMI source device to this input port. The signal from this port will
be replicated to all HDMI output ports. Please see the Features section on page
3 for supported HDMI 1.3 features.
6
5V DC Power Input Receptacle
Connect the included 5V DC power supply between this receptacle and a power
source. Only use the power supply supplied with this unit. Screw the locking
power tip into the socket on the Splitter until it fi ts snugly.
7
Power Indicator LED
This LED will become active once the included 5V DC power supply has been
properly connected to the unit and a power source.
PANEL DESCRIPTIONS
