INTRODUCTION
Thank you for purchasing the RMT-MATRIX-444 and/or the RMT-2-CAT5.
The RMT-MATRIX-444 is a powerful tool that can be used with the EXT-DVIKVM-
444. It will allow you to remotely switch your sources. If your remote station is
located in another room, you can easily switch to another source by pressing
one of the four pushbutton switches on the RMT-MATRIX-444. This box easily
connects to the EXT-DVIKVM-444 by one CAT5e cable. You can use up to four
RMT-MATRIX-444 units with the EXT-DVIKVM-444 to have the ability to switch
at all four remote workstations.
The RMT-2-CAT5 now gives your Gefen 4x4 Matrix box the power of remote
switching. The RMT-2-CAT5, in conjunction with up to four RMT-MATRIX-444
units, will extend your ability to manage your sources at each remote display. It
will work with any of our 4x4 matrix untis listed below. Your remote switching is
easily setup by using one CAT5e cable from the RMT-MATRIX-444 to the RMT-
2-CAT5, and then connecting the RMT-2-CAT5 to your matrix switcher by using
a serial cable. You can now switch your sources at each display without ever
having to switch locally again.
1
OPERATION NOTES
READ THESE NOTES BEFORE INSTALLING
OR OPERATING THE HOME THEATER SCALER
• The RMT-MATRIX-444 and RMT-2-CAT5 units are housed in a metal box for
better RF shielding.
• Industry standard Category-5 (CAT-5) cables are used to operate the
RMT-MATRIX-444 and RMT-2-CAT5.
• The RMT-MATRIX-444 is designed to work with the EXT-DVIKVM-444 or in
conjunction with the RMT-2-CAT5.
• The RMT-2-CAT5, with up to four RMT-MATRIX-444 units, will work with
these Gefen products:
EXT-HDTV-444N
EXT-HDTVKVM-444
EXT-DVI-444N
EXT-HDMI-444
EXT-COMPAUD-444
