2
READ THESE NOTES BEFORE INSTALLING OR
OPERATING THE GEFENTV ETHERNET OVER PLC
•
This device passes all 10/100BASE-T Ethernet network protocols (TCP/
IP, NETBUEI, Microsoft Networking, etc.) at speeds of up to 200Mbps (Full
duplex fast Ethernet).
•
All devices connected to the sending and receiving nodes must be on the
same power phase to communicate properly.
•
Multiple receiving nodes can be used on the same in-house power line
system to extend the network to multiple locations.
•
Performance of GefenTV Ethernet Over PLC can be affected by “noisy”
devices on the power lines. This can be alleviated by using a PLC fi lter
(Part# GTV-PLC-FUS for US and GTV-PLC-FEU for Europe). Offending
devices need to be connected to the PLC fi lter before being connected to the
wall outlet.
OPERATION NOTES
