page | 9
Using Slow Mode
When set to
slow switching mode
, the 1:8 Splitter for HDMI 4K x 2K will follow the standard
authentication process, based on the HDMI and HDCP specifications.
Slow mode is
recommended when the source does not support multiple devices.
1. Disconnect the power supply from the splitter.
2.
Set the
FST
switch to the
Slow
position.
3. Reconnect the power supply to the splitter.
If the
FST
switch is moved from the
Fast
position to the
Slow
position while the
splitter is powered, then power-cycle the splitter by disconnecting and reconnecting
the power supply in order for the change to take effect.
Operating the 1:8 Splitter for HDMI 4K x 2K
Set to the
Slow
position
Setting the Switching Mode
