Gefen EXT-WHD-1080P-LR-RX, User Manual

Page: 19 / 54

page | 9
Connection Instructions
► Video
1. Connect one of the included HDMI cables from the HD source to the HDMI 1 port on
the Sender unit.
2. Connect the other (included) HDMI cable from a second HD source to the
HDMI 2 port.
3. Connect an HDMI cable from the HDMI Out port on the Sender unit to a local HD
display. This display will allow monitoring of the HD source.
For best results, the local display should be identical, or have the same capabilities
as the main display in terms of resolution and features (e.g. CEC, 3D, 1080p).
►
IR Control -
see Sample Wiring Diagram (page 10)
4. Connect the included IR emitter array from the
IR Out
port on the Sender unit to the
HD sources. This will allow the sources to be controlled from the viewing location.
5. Connect the included IR Extender to the
IR In
port on the Receiver unit.
►
Power
6. Connect the included power supplies:
• Connect the power supply with the round power connector to the Sender unit.
• Connect the power supply with the mini-B USB connector to the Receiver unit.
Installation
Ge
tting S
tar
ted
Information
Once the IR extender is connected to the Receiver unit, the IR sensor on
the Receiver unit will be disabled.