Gefen EXT-WHD-1080P-LR-RX, User Manual

Page: 18 / 54

page | 8
Introduction
Ge
tting S
tar
ted
Installing the Batteries
1. Push and pull-up the tab at bottom of the IR remote to remove the battery cover.
2. Make sure that the batteries are installed with the correct polarity, as shown in the
illustration, below. Always use two 1.5V AAA-type batteries.
3. Replace the battery cover. Push the battery cover down until the tab snaps in place.
Warning!
Risk of explosion if battery is replaced by an incorrect type. Dispose of used
batteries according to the instructions.
Input
RMT-WHD-1080P
OK
Sender IR
*Preferred
®
+
-
+
-
Input
RMT-WHD-1080P
OK
Sender IR
*Preferred
®
+
-
+
-
Battery cover tab
Battery cover
Ge
tting S
tar
ted