8
How to Connect the 1:2 VGA Audio over CAT5
1. Connect the VGA video source to the VGA Audio Over CAT5 sending unit
using the supplied VGA cable.
2. Connect the audio source to the VGA Audio Over CAT5 sender unit using
the user supplied 3.5mm mini-phono jack stereo cable.
3. Optionally, connect the 3.5mm mini-phono jack stereo output from the
sender to a compatible device using a user supplied 3.5mm mini-phono jack
stereo cable.
Example: Use a microphone at the receiver’s location in this example
scenario. Connect a microphone to the 3.5mm mini-phono jack input on
the receiver. Then use a 3.5mm mini-phono jack stereo cable to connect
the sender’s output to a microphone input port on a computer or amplifi ed
receiver.
4. Connect up to 2 VGA displays to the 1:2 VGA Audio over CAT5 receiving unit
using user supplied VGA cables.
NOTE: Both outputs are mirrored images of the VGA video source.
5. Connect up to 2 of the 3.5mm mini-phono jack audio outputs on the 1:2
VGA Audio over CAT5 receiving unit to amplifi ed audio devices using user
supplied 3.5mm mini-phono jack stereo audio cables.
6. Optionally, connect a 3.5mm mini-phono jack stereo audio device to the
receiver for transmission back to the sender’s location. Please see the
example in step 3 for an example scenario.
7. Connect the 1:2 VGA Audio over CAT5 sending and receiving units together
using a single CAT-5, CAT-5e or CAT-6 cable (terminated according to the
TIA/EIA-568-B specifi cation).
8. Connect the included 5V DC power adapters to both the sending and
receiving units.
9. Power on all displays fi rst, and then the source.
CONNECTING AND OPERATING THE 1:2 VGA AUDIO OVER CAT5
