5
PANEL DESCRIPTIONS
1 Infrared
Sensor
Point the supplied remote control at this port to access
2 Power
LED
When this is lit, the unit is powered on
3 RS232
Input
Connect an RS-232 serial cable to this port. This port is used to update the
fi rmware in addition to controlling the unit via RS-232. Refer to the Gefen web
site to download documentation on the RS-232 command set.
4
5V DC Locking Power Input
Connect the supplied low-voltage power supply cord into this socket
5
Genlock (Reference) Input
Connect Genlock signal here
6 S/PDIF
Audio
Output
This S/PDIF output will supply supported audio formats for output to an
external audio decoder or device such as an amplifi er or receiver.
7
HD-SDI Dual Link Input
Input HD-SDI here
8
HD-SDI Dual Link Loop Output
Connect the loop output here
9
HD-SDI Dual Link Input
Input HD-SDI here
10 HD-SDI Dual Link Loop Output
Connect the loop output here
11 HDMI
Output
Connect up an HDTV display to this HDMI port
