5
SENDER PANEL DESCRIPTIONS
1
Selected Source LED For HDMI Output 1
The selected source for HDMI Output 1 will be indicated by an active LED.
2
Selected Source LED For HDMI Output 2
The selected source for HDMI Output 2 will be indicated by an active LED.
3
Selected Source LED For HDMI Output 3
The selected source for HDMI Output 3 will be indicated by an active LED.
4
Selected Source LED For HDMI Output 4
The selected source for HDMI Output 4 will be indicated by an active LED.
5 IR
Receiver
This receiver will receive commands from an optional RMT-16 IR remote
control for routing outputs to inputs. Routing can be performed with the
included receivers without this remote.
6
IR Extension Port
If the receiver is in a location where the IR receiver is not in direct line of
sight of he remote controller, an optional IR Receiver Extension (Part# EXT-
RMT-EXTIR) can be connected to this port.
7 Power
LED
This LED will be active when the included 24V DC power supply is
connected.
8
HDMI Output 1 CAT5 Extension Ports
DDC and video output ports for extension to remote receiver. Both cables
must be connected for proper operation.
9
HDMI 1 Extension Input Port
For proper extension, the supplied 1 foot HDMI jumper cable must be
attached between this port (6) and HDMI Output Port 1 (22).
10 HDMI 1 IR Blaster Port
Optional IR emitter (Part# EXT-2IREMIT) can be attached to relay IR
commands from the remote receiver to the blaster for remote control of
devices.
11 HDMI Output 2 CAT5 Extension Ports
DDC and video output ports for extension to remote receiver. Both cables
must be connected for proper operation.
12 HDMI 2 Extension Input Port
For proper extension, the supplied 1 foot HDMI jumper cable must be
attached between this port (9) and HDMI Output Port 2 (23).
13 HDMI 2 IR Blaster Port
Optional IR emitter (Part# EXT-2IREMIT) can be attached to relay IR
commands from the remote receiver to the blaster for remote control of
devices.
