14
SWITCHING ACTIVE USB CONTROL
CONTROL SWITCH
The front panel of the DVI 3500HD sender unit has a control switch that will
determine the location of the active USB ports. This switch will allow the user to
activate the USB ports on either the sender (local) unit or receiver (remote) unit.
This does not affect the DVI outputs which are permanently active on both units.
To select a location, move the switch to the desired position. The settings are as
follows:
LOCAL
USB ports on the DVI 3500HD sender unit are active. USB ports
on the DVI 3500HD receiver are inactive.
REMOTE
USB ports on the DVI 3500HD receiver unit are active. USB ports
on the DVI 3500HD sender unit are inactive.
CONSOLE
This switch is currently not used. This switch and the console
outputs on the rear panel of the DVI 3500HD sender and receiver
units are intended for future feature implementation.
