12
CONNECTING AND OPERATING THE DVI 3500HD
3. Connect a user supplied 3.5mm analog stereo ampli
fi
ed audio device to the
stereo output on the receiver unit.
4. Connect a RS-232 serial communications device to the RS-232 port on the
receiver unit using a user/device supplied DB-9 serial communication cable.
SECTION 3
Connecting the DVI 3500HD Sender and Receiver Units Together
1. Connect 2 pairs of user supplied LC terminated
fi
ber optic cabling to the
optical inputs A and B on the DVI 3500HD sender unit. Please note the
numbering on the rear panel of the sender unit and be sure to match the
cabling to the proper numbering pattern when connecting them to the
receiver unit.
2. Connect the opposite ends of the 2 pairs of LC terminated
fi
ber optic cabling
to the optical inputs A and B on the DVI 3500HD receiver unit. Please note
the numbering on the rear panel of the receiver unit and be sure to match
the cabling to the proper numbering pattern that was on the sender unit.
SECTION 4
Connecting Power and Power-up Sequence
1. Connect one of the supplied 12V DC power supplies to the DVI 3500HD
sender unit’s power receptacle. Connect the opposite end to an open wall
power socket.
2. Connect one of the supplied 12V DC power supplies to the DVI 3500HD
receiver unit’s power receptacle. Connect the opposite end to an open wall
power socket.
3. Power on the display(s).
4. Power on all source devices.
5. Con
fi
rm that the power LED is active on both the sender and receiver units.
Also con
fi
rm that the status LED is also on.
6. If using USB devices, ensure that the status LED’s by each of the USB
inputs and outputs are active.
