Gefen EXT-DVI-2500HD, User Manual, Page: 6 / 20

READ THESE NOTES BEFORE INSTALLING OR
OPERATING THE DVI•2500HD
• LC terminated fiber optic cables (up to 2 pairs) are required for operation of
the DVI•2500HD system. A single CAT-5e cable will also be required when
operating in Direct DDC mode only.
• This device will accept both Single-Mode and Multi-Mode fiber optic cables.
• This device will accept both 50µ and 62.5µ multi-mode fiber optic cable
types.
• The DVI•2500HD can operate in either Direct DDC (HDCP-Compliant) or
Virtual DDC modes. For a description of these modes, please see page 8.
• Maximum extension in Direct DDC mode is 330 feet (100 meters) at a
maximum resolution of WUXGA (3840x1600)
• Maximum extension in Virtual DDC mode is 6,600 feet (2 kilometers) at a
maximum resolution of WUXGA (3840x1600)
• This device will accept both Single Link and Dual Link DVI type sources/
displays. Only 1 pair of LC cables, on Channel 1, are required when using
Single Link devices. A second pair is only required, on Channel 2, when
operating this device with Dual Link devices.
• WARNING:
Do not look directly into LC receptacles of the sending unit. This
device, however, does operate under the Laser Class I specification for eye
safety.
2
OPERATION NOTES