manualshive.com logo in svg

Gefen EXT-DSC, User Manual

Share
Download
Gefen EXT-DSC User Manual Download Page 29

26

PULL MODE

To be activated, the Pull mode requires speci

fi

 c actions. In this section and its 

subsections we document speci

fi

 cally this mode.

The Pull mode of Content Access

The Pull mode is con

fi

 gured through the HTTP con

fi

 guration interface, under 

Administration/Pull mode.

The Pull mode can be used bidirectional to:

 

►

Automatically publish 

fi

 les to the EXT-DSC.

Each time the EXT-DSC has been scheduled to update the content of its 
local storage, it will connect to the speci

fi

 ed server, check for changes, and 

download all modi

fi

 ed 

fi

 les.

 

►

Upload logs and previews to a remote WebDAV server.

The publish action of the Pull mode can be used with WebDAV server or with 
standard HTTP servers. In this last case an XML 

fi

 les describing the content of 

the server must be available. The Pull mode timings can be con

fi

 gured either 

directly from the HTTP interface or using iCalendar 

fi

 les.

There are two ways to con

fi

 gure the Pull mode on a EXT-DSC unit:

Summary of Contents for EXT-DSC






































Reviews:

No comments

Brands by name

Popular brands

Load more brands