17
USING THE EXT-DSC HTTP SERVER
►
Validate the new network con
fi
guration with the Update button.
►
The changes will be valid once the EXT-DSC unit has rebooted. If you
want to immediately reboot the unit, check the Reboot now check box
before pressing the Update button.
Troubleshooting
Once the device has rebooted, you can check the new con
fi
guration by
accessing the HTTP server. Note that you need to use the new IP address this
time. If you are not able to connect to your EXT-DSC unit after modifying the IP
con
fi
guration, please read the following suggestions before contacting the Gefen
support team.
1. Check the LED on you EXT-DSC unit.
►
If the led is blinking once per second in orange color and the red led is
bright on then you are in one of the following cases
•
The IP address of your EXT-DSC unit has already been assigned
on the network. Check your network con
fi
guration and make sure
that the address <new IP> is not taken by another device.
•
Your EXT-DSC unit has been con
fi
gured to activate DHCP but
no DHCP server has been detected on your network. Make sure
you have selected the Static radio button. If not, reboot the unit by
keeping pressed the push-button for few seconds.
►
If the green led is blinking fast (several times per second) then your
EXT-DSC unit is in recovery mode. In this case, unplug and power up
again the EXT-DSC unit. Wait about 1 minute to complete the booting
procedure and check the led again. If the EXT-DSC unit remains in
recovery mode then contact support.
2. Wrong IP address
►
In the case where your EXT-DSC unit has been con
fi
gured with a wrong
IP address and cannot longer be contacted, you need to reinitialize the
unit to its factory default (See Reset to Factory default) and restart the
con
fi
guration procedure.
Using The EXT-DSC HTTP Server
If you want access to the HTTP server for the
fi
rst time, please read the previous
connection sections
fi
rst. Otherwise make sure that you have a PC connected
to the EXT-DSC unit through Ethernet connection and that you have correctly
con
fi
gured the PC and/or the EXT-DSC unit to be on the same network with the
right IP address.
Execute on the PC a Web browser such as Internet Explorer or Firefox. There
