5
SENDER PANEL DESCRIPTIONS
1 Power
LED
When this LED is lit, power is correctly supplied to the unit.
2 USB
Input
Supplies USB connection from the host computer to the Sender. Connect a
USB cable from an available USB port on the computer to this jack.
3
Host Connected LED
When this LED is lit, this indicates that the host computer and the Sender unit
are connected together properly.
4
CAT-5 USB Link Input
Connects to the Receiver unit via a length of CAT-5e or CAT-6a cabling. Used
for transmission of the USB signal from Sender to Receiver.
5
CAT-5 Video Link Input
Connects to the Receiver unit via a length of CAT-5e or CAT-6a cabling. Used
for transmission of the DVI video signal from Sender to Receiver.
6 DVI
Input
Connects the computer’s DVI video interface output to the Sender unit.
7
5V DC Locking Power Connector
Connect the supplied 5V DC locking power supply here.
