7
RECEIVER PANEL DESCRIPTIONS
1 Power
LED
When this LED is lit, power is correctly supplied to the unit.
2
EQ Trim Pot
The EQ trim pot is used to equalize the signal to compensate for the extension
distance and the quality/skew variances that are found in different CAT-5e / CAT-
6a cabling brands.
3 USB
Outputs
Connect the keyboard, mouse, printer and any USB-compatible accessories
(such as an external hard disk drive) to these ports.
4
CAT-5 USB Link Input
Connects to the Receiver unit via a length of CAT-5e or CAT-6a cabling. Used
for transmission of the USB signal from Sender to Receiver.
5
Host Link LED
When this LED is lit, this indicates that the host computer and the Sender unit
are connected together properly.
6
CAT-5 Video Link Input
Connects to the Sender unit via a length of CAT-5e or CAT-6a cabling. Used for
transmission of the DVI video signal from Sender to Receiver.
7 DVI
Output
Connect the remote DVI-compliant display device to this port on its input cable.
8
5V DC Locking Power Connector
Connect the supplied 5V DC locking power supply here.
