5
SENDER UNIT DESCRIPTIONS
1 Power
This LED indicator will glow bright red once power has been applied to the unit.
2
110 / 220 V AC
Connect the included AC power cord to this power receptacle.
3
Fuse Drawer
Each power receptacle houses a fuse drawer. Within each fuse drawer are two
(2) 250 V fuses. One fuse is active and the other is a spare.
4 Power Switch
Turn the power ON or OFF using this switch.
5 IR Blaster
Connect an IR Blaster cable (Gefen part no. EXT-2IREMIT) from this port to the
Hi-Def source to control the source from the viewing location.
6 RS-232
This RS-232 serial port is used to update the Receiver Unit fi rmware.
7 Ethernet
Connects the Sender Unit to the network using Ethernet cabling.
8 Link
Connects the Sender Unit to the Receiver Unit using CAT-5 cabling.
9 HDMI In
Connect a Hi-Def source to this locking HDMI port, using the included HDMI
cable.
