manualshive.com logo in svg

Gefen Pro GEF-HDCAT5-ELRPOL2, User Manual

Share
Download
Gefen Pro GEF-HDCAT5-ELRPOL2 User Manual Download Page 2

ASKING FOR ASSISTANCE

Rev A2

Technical Support

:

Telephone   (818) 

772-9100

   (800) 

545-6900

Fax 

  (818) 

772-9120

Technical Support Hours:

8:00 AM to 5:00 PM Monday thru Friday, Pacifi c Time
For 24 / 7 support, see the back of the product for the support number

Write To:

Gefen, LLC.
c/o Customer Service
20600 Nordhoff St 
Chatsworth, CA 91311

www.gefenpro.com
[email protected]

Notice

Gefen, LLC reserves the right to make changes in the hard ware, packaging and 

any accompanying doc u men ta tion without prior written notice.

Extender for HDMI ELR with PoL 2 over CAT5

is a trademark of Gefen, LLC

HDMI

, the

                

 logo, and 

High-Defi nition Multimedia Interface

 are 

trademarks or registered trademarks of HDMI Licensing in the United States and 

other countries.

©  2011 Gefen, LLC, All Rights Reserved

All trademarks are the property of their respective owners

Summary of Contents for GEF-HDCAT5-ELRPOL2






























Reviews:

No comments

Brands by name

Popular brands

Load more brands