5
4
STEP 3.
Enter your information
to log in.
3
Activate
STEP 1.
Twist and pull the sensor’s cover to remove it, then press and hold the
Reset Button for 6 seconds. The LED Indicator Light will begin to rapidly
flash, indicating that your sensor is ready to connect via Easy Mode.
What does the blinking light mean?
Reset the sensor by pressing and holding the Reset Button for 6 seconds. The LED
Indicator Light will begin to flash rapidly.
- Reset one time (press and hold) to reach Easy Mode (Rapidly blinking blue, 2x per
second)
- Reset again (press and hold) to reach AP Mode (Slowly blinking blue, 3x per seconds)
Note:
You must remove the sensor’s cover to view the Reset Button and
LED Indicator Light.
2
Register a Geeni account, con.
Reset Button
LED Indicator
Light
