SETTING UP
CLOCK TIME SETTING
The correct time should be set as follows:
- Press and hold down
Time
button.
- Whilst holding down the
Time
button, press
Hour
and then
Minute
buttons as necessary to display the correct time.
Note: that the clock is a 12 hour clock; in the case of PM, an indicator will
show to the top left of the clock display.
RINGER SETTING
A switch
(Ringer)
located on the rear of the base unit allows the ringer to
be switched
On
or
Off
.
If you do not wish the telephone to ring, set the switch to the
Off
position. The
ringer lamp will still flash on receipt of a call.
Outgoing calls can still be made when the switch is set to the
Off
position.
DIMMER SETTING
A switch
(Dimmer)
located on the left side of the base unit allows to adjust
(Hi or Lo) the brightness of the display.