USING THE PHONE
1 - MAKING A CALL
- Press the
key once (Speakerphone mode) or lift the handset.
The LCD will display the call timer as follows for example and the in use LED
will light:
- Use the dial keypad to dial the number. The digits being dialled will appear
on the LCD display at the same time. For example:
After about 3 seconds the LCD display will switch to the call timer mode.
- The Call Timer will stop when you replace the handset or press the
key
again at the end of the call. The LCD will revert back to the default mode after
about 3 seconds.
Note: If using the handset, you can switch to using the
speakerphone….simply press the
key once, and replace the handset.
2 - RECEIVING A CALL
When there is an incoming call, the Jupiter 20 will ring.
Lift the handset or press
key to answer the call. The Call Timer will start
soon after the call is answered and the in use LED will light.
9
00-18
0 1 2 3 4 5 6 7 8 9
