background image

View Caller Display List

Use 

 or 

 to scroll through the caller display list.  The NEW call 

counter will decrease by the number of unreviewed entries viewed

Notes:

  At the end of the caller display list the LCD display will display 

END OF LIST

.  If there are no caller display telephone numbers in the 

caller display list,  

NO CALL

 is displayed 

Dial a Number from the Caller Display List

Lift the handset or press 

 to get a dial tone

Use 

 or 

 to scroll through the caller display list until you find the 

telephone number you wish to dial

Press 

OK 

to automatically dial the telephone number

Or

In the on-hook position use 

 or 

 to scroll through the caller 

display list until you find the telephone number you wish to dial

Lift the handset or press 

 to automatically dial the telephone 

number

Note:

 The Callback function cannot work correctly if you are using the 

Dallas 30 with a PBX unless you have set the PBX dial prefix as described
in the PBX Dial Prefix section found in the Settings chapter.

Delete an Entry from the Caller Display List

Use 

 or 

 to scroll through the caller display list until you find the 

telephone number you wish to delete

Press 

X

You will be prompted to confirm the deletion

DELETE CALL?’

Confirm by pressing 

again.  The TOTAL call counter will decrease 

by 1.  The NEW call counter may decrease by 1 if this was an 

unreviewed entry

Note

:  If you do not confirm by pressing 

again, the Dallas 30 will revert 

to standby after 5 seconds

Delete All Entries from the Caller Display List

Use 

 or 

 to scroll through the caller display list until you find the 

telephone number you wish to delete

Press 

X

 for a long period of time until 

DEL ALL 

CALLS?’

is displayed

Confirm by pressing 

again.  The TOTAL and NEW call counter will 

be reset to 0

Note

:  If you do not confirm by pressing 

again, the Dallas 30 will revert 

to standby after 5 seconds

CALLER DISPLAY

CALLER DISPLAY

23

24

Summary of Contents for Dallas 30




















Reviews: