5
1 - Connecting the telephone
- Connect the handset cord.
- Open the battery door by turning around the locking tab.
Insert 4 alkaline batteries (type AA 1.5V, not supplied) in the
compartment (*). Batteries are required if you wish to
increase the ringer level up to 10 dB & also use the
“Mechanical Bell” ringer feature.
Replace the battery door and turn the locking tab to the
locked position.
- Connect the line cord plug into the line socket on the rear of
the unit (*).
- Connect the other end of the line cord into the wall PTT
socket (*).
2 - Ringer volume setting
The phone is equipped with “Mechanical Bell” ringers which can be
selected between UK (tring..tring) & European (triiiiiiiiiiiing) style
bells, via the switch located in the battery compartment.
The mechanical bell
sound
is functional only when the batteries are
inserted and are not run down.
When there are no batteries or the batteries are “low” the Battery
low indicator flashes and the ringer sound is the normal two tone
electronic ring.
A switch located on the right side allows the ringer to be switched to
LOUD Hi, Low or Off:
: Off
: Low
: Hi
: LOUD
SETTING UP
(*)
C
las
s
if
ied
TN
V
-3
a
c
c
o
rd
ing
t
o
E
N
6
0
9
5
0
s
ta
n
d
a
rd
.
