background image

 

exercised to ensure that any naive users are 
familiar with this requirement. 
The handset earpiece volume can be adjusted by 
moving the Volume switch, located above the 
handset microphone, to High, Medium or Normal. 

     

High /Middle /Normal 

 

Note: In the tone (treble) position, if receive volume 
level is set to the maximum, whistling may occur. 
Then the receive level setting should be decreased. 

 

5 – USING THE TELEPHONE 

Having connected the telephone to the telephone 
socket, lift the handset, await dial tone, and dial 
required number. On completion of the call, 
carefully replace handset in cradle. 

 

6 – MEMORY OPERATION 

Your telephone can store up to 3 ’One touch’, and 
10 ’Two touch’ telephone numbers. Each 
telephone number must be stored in a specific 
memory location and can be up to 21 digits long. If 
you wish to store a number having more than 21 
digits (as may be required, for example, by 
international numbers preceded by a 3 or 4 digit 
national operator access code), it is suggested that 
the 3 or 4 digit access code is stored in a ’One 
touch’ location and the international number stored 
in any other location. 

Note: Numbers stored in the memory may be lost 
if the telephone is disconnected from the telephone 
line. 

En

 

Summary of Contents for CL10+













Reviews: