7
Low
Middle High
Melody 1
1
2
3
Melody 2
4
5
6 (by default)
Melody 3
7
8
9
If you don’t like the ringer melody,you can choose a new one by changing
the settings as follow:
- Lift the handset.
- Press
PROG
button.
- Press
#
button.
- Press any button 1 to 9.
Ringer will be activated on next call.
4 - TONE/PULSE SWITCH (T/P)
The Tone/Pulse switch is factory pre-set to Tone position (T). In the US,all
telephone exchanges now use Tone dialling.If your phone does not dial out,
it is probably being used from an older private switch- board (PBX). In this
case,theTone/Pulse switch must be moved to Pulse.
5 - TIME BREAK RECALL SWITCH (600/100)
For the US, the TBR switch is factory pre-set to 600ms. It can be switched
to 100ms for other locations or PBX’s.
6 - HOTEL MESSAGE WAITING SWITCH
These are used with the new services provided on hotel network.
A switch located behind your phone allows to set
ON
the hotel message
waiting function.
When the switch is setting
ON
and when you receive a message, the red
light is lit to inform you that you have a message on phone .
SETTING UP
Summary of Contents for AMPLIPOWER60+
Page 1: ......
