Geemarc AMPLIDECT 280 Page 66 User Manual Download

Page: 66 / 90

Notes:

When recording the announcement, speak towards
the microphone on the base. In order to achieve the
best recording results please make sure you are
about 20cm from the microphone.

If you record/playback/restore Announce1 or
Announce2, the answer mode (refer to part.

Answer

mode Select

) will be switched to the corresponding

mode automatically.

Play Announce1/Announce2

You can play the current Announce1/2.

Way 1: Using the menu

1. Press the

TAM

soft key in Standby mode.

2. Press the

Select

soft key to choose

Announce

3. Press

Select

soft key to choose

Announce1

or press

the

Down

key to choose

Announce2

, then press the

Select

key to confirm.

4. Press the

Select

soft key to choose

Playback

5. The current Announce1/2 will be played. During the
process you can use the

Back

soft key to stop and exit.

Way 2: Using the base unit

In the active mode (all lights on) press the

aaa key on the base unit to playback the current

TAM FUNCTIONS

(AMPLIDECT285™ ONLY)

Summary of Contents for AMPLIDECT 280



























































































Search results

Summary of Contents for AMPLIDECT 280

Reviews:

Related manuals for AMPLIDECT 280

Brands by name

Popular brands

Geemarc AMPLIDECT 280, User Manual

Search results

Summary of Contents for AMPLIDECT 280

Reviews:

Related manuals for AMPLIDECT 280

Brands by name

Popular brands