11
When there is an
incoming call but the
shaker doesn‟t
vibrate.
1) Check it is connected to the
shaker correctly.
2) Check the shaker socket to
see if it has been damaged.
3) Check the alarm mode
selection switch position is
correct.
The Amplicall20
does not ring when
the doorbell is
pressed
1) Check that the red light on
the doorbell flashes when it
is pressed. If it does not,
change the battery.
2) Register the doorbell to the
AmpliCALL20 again
3) Check the alarm mode
selection switch position is
correct i.e. not on „0‟
INSTALLATION
