manualshive.com logo in svg

Geemarc AMPLI600, User Manual

Share
Download
Geemarc AMPLI600 User Manual Download Page 43

43

call is from an area not providing caller display, Unavailable number 
will be displayed

●

  It could be a call from a PBX.  Caller display may not work properly if 

the telephone is connected to a PBX

No response on LCD display

●

  If you have experienced a power failure the batteries may become 

weak. If the power is restored and the LCD display still does not re-
spond then replace the batteries with new ones.

No Strobe Ringer and/or bed shaker will not activate

●

  Make sure the strobe and/or shaker switch is turned “ON

●

  Make sure the Bed Shaker is plugged in correctly

No ampli

fi

cation

●

  1. Check to see if the AMPLI amplify button is “ON”.  You should see 

the red light

There is Interference on the line

●

  A filter may be required for homes with DSL line. 

There is a red light that continues to 

fl

ash.

●

  You have un-reviewed Caller ID / Call Waiting information or missed a 

call.

No Numbers in memory

●

  No number stored in that memory button.

●

  If your phone has been disconnected for a few hours the numbers 

stored will be lost.

Emergency Connect button is not working

●

  There may be a phone off the hook somewhere in your home.

●

  Check the Auto On Hook Feature 

●

  The remote band’s battery is low or is not installed properly. 

●

  Check the antenna on base.

TROUBLESHOOTING

Summary of Contents for AMPLI600

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands