Geemarc AMPLI600 User Manual Download Page 41

Page: 41 / 48

NEW CALL/MESSAGE LED

The red LED on the front of the phone will

ash to indicate missed calls.

To cancel the

ashing light, review your new calls. Simply use

▲

▼

access the log and scroll through all the new calls.

Alternatively, you can delete the log of unreviewed calls

Use

▲

▼

to access the log

Press and hold

until the screen displays ‘

ALL DEL?

’

Press

to con

Press

to exit

If you do not subscribe to caller display or message waiting service simply
press

▲

▼

once.

To turn off this feature, set the ‘MSG’ switch on the base of the phone to
‘OFF’. New calls will still be indicated with ‘N’ on the screen but the LED
will not

ash.

Message Waiting LED

If you are connected to certain type of switchboards, you may get a message
waiting/voicemail service. ‘

MSG WAITING

’ will be displayed on screen and

the red

LED

will be lit continuously. You must retrieve your message in

order to turn the red light off.

Summary of Contents for AMPLI600

















































Search results

Summary of Contents for AMPLI600

Reviews:

Related manuals for AMPLI600

Brands by name

Popular brands

Geemarc AMPLI600, User Manual

Search results

Summary of Contents for AMPLI600

Reviews:

Related manuals for AMPLI600

Brands by name

Popular brands