manualshive.com logo in svg

Geely Emgrand 2015, Manual

The Geely Emgrand 2015 is a stylish and efficient vehicle that offers exceptional performance on the road. To make the most of your driving experience, download the free user manual from our website. This comprehensive manual provides detailed instructions and insights to ensure you maximize the potential of your Geely Emgrand 2015.

Share
Download
background image

76

Seat and Restraint System

Adjustment of Front Seat and    
Rear Seat

Do not adjust the seat while the vehi-       
cle is in motion. Otherwise, the vehi-      

cle may lose control, which can cause a       
collision and result in serious injury.
Only adjust the seat when the vehicle is sta-        
tionary and before wearing the seat belt.      
Improper adjustment of the seat belt may      
cause serious injury.
Do not drive with the seat back flat. Other-        
wise,  the  shoulder  strap  of  the  seat  belt       
cannot be restrained to the chest of the pas-        
senger. The passenger may slide out from      
the lower part of the seat belt and suffer        
serious injuries during a collision.

Manual Driver Seat

The driver seat can be adjusted in six direc-        
tions. The adjustment handle and adjust-     
ment lever are located on the left side and        
front side of the seat respectively. A lumbar       
support adjustment handle is also provided     
on the right side of the seat, which can        
adjust the lumbar support forward and rear-      
ward.

Seat Back Angle Adjustment

1.

Seat cushion height adjustment handle

2.

Reclining adjustment handle

When the seat back needs to be adjusted       
rearward, lift the seat reclining adjustment     
handle 2 up to unlock the seat back. Press        
against  the  seat  back  rearward  with  your      
back lightly to rotate the seat back rearward       
to the desired position. Then, release the      
reclining adjustment handle 2 to lock the      
seat back.
When the seat back needs to be adjusted       
forward, lift the seat reclining adjustment     
handle 2 up to unlock the seat back. Move        
your back away from the seat back slowly       
until  the  seat  back  is  rotated  forward  to  the        
desired position. Then, release the reclining     
adjustment handle 2 to lock the seat back.

Do  not  recline  the  seat  back  more      
than necessary when the vehicle is in      

motion.
The seat belt is the most effective in a colli-         
sion only when the driver and front passen-       
ger are sitting up straight and well back in        
the seats.
If you lean against the seat, the lap belt may         
slide past the hips and apply restraint forces       
directly to the abdomen or your neck may       
contact the shoulder belt.

Summary of Contents for Emgrand 2015







































































































































































































































Reviews:

No comments

Related manuals for Emgrand 2015

Whispbar K611W Fitting Instructions Manual preview
K611W
Brand: Whispbar Pages: 77
Chariot Carriers 51100913 Instruction Manual preview
51100913
Brand: Chariot Carriers Pages: 3
Kargo Master 4A82T Installation Manual preview
4A82T
Brand: Kargo Master Pages: 6
Metra Electronics 95-8202 Installation Instructions Manual preview
95-8202
Brand: Metra Electronics Pages: 20
Rago FABRICATION R2223TTUNDM Installation Manual preview
R2223TTUNDM
Brand: Rago FABRICATION Pages: 10
Mini COOPER Owner'S Manual preview
COOPER
Brand: Mini Pages: 20
Right Weigh 221-SK Installation Manual preview
221-SK
Brand: Right Weigh Pages: 16
ideus VV950 User Manual preview
VV950
Brand: ideus Pages: 159
JKS OGS125 Installation Instructions preview
OGS125
Brand: JKS Pages: 3
Paccar DAF CHARGEMAX 90 User Manual preview
DAF CHARGEMAX 90
Brand: Paccar Pages: 40
Fiat 500L 2020 Owner'S Manual preview
500L 2020
Brand: Fiat Pages: 284
Ford TRANSIT CUSTOM Quick Reference Manual preview
TRANSIT CUSTOM
Brand: Ford Pages: 15
Honda 08L04-SZA-100 Installation Instructions preview
08L04-SZA-100
Brand: Honda Pages: 3
Curt Manufacturing 58963 Installation Manual preview
58963
Brand: Curt Manufacturing Pages: 4
Whispbar K559W Fitting Instructions Manual preview
K559W
Brand: Whispbar Pages: 112
Rigid Hitch BULL BAR Installation Instructions preview
BULL BAR
Brand: Rigid Hitch Pages: 2
Honda 2000 Accord Sedan Online Reference Owner'S Manual preview
2000 Accord Sedan
Brand: Honda Pages: 320
Metra Electronics 95-7322 Installation Instructions Manual preview
95-7322
Brand: Metra Electronics Pages: 16

Brands by name

Popular brands

Load more brands