5
Install RO Tube
Pull out RO Tube
Insert RO Tube
Pull out the clip
Pull out RO Tube
Press the inner claw
Insert the clip
Apply 5-6 wraps of Teflon thread sealant tape to the male thread on quick fittings.
Install the quick fittings and tighten it.
Take down the old post carbon filter from RO system.
Connect new post carbon filter to RO system, and please make sure at right direction.
◎
◎
◎
◎
NOTE:
When insert RO tube, please ensure inserted fully into the quick fitting.
If fittings are not fit for your system, please contact with us, we will help you solve the problem.
Cut the tube square and remove burrs and sharp edges.
Ensure that the outside diameter is free from score
marks. For soft or thin walled plastic tubing we recom-
mend the use of a tube insert.
Push the tube into the fitting and up to the tube stop.
Pull on the tube to check that it is secure. Test the
system before use.
1.
2.
3.
V. Installing Tubing Into Fittings
