8
Note: at least two people will be required to mount the hood.
INSTALL THE HOOD
1. Raise the hood into its mounting position.
2. Align the rectangular opening on the back of
the hood with the wall-mounting bracket. Gently
lower the hood until it securely engages the
bracket.
3. Open the Al. filter and find the two
φ8
mm
holes on the back of the hood. Level the hood
with 2 mounting screws (4*30mm) with washer.
Use drywall anchors provided.
4. Measure the height of the glass to the slider duct fixing
support. Adjust the height of the chimney according to the
height. Then use the duct fixing support with two screws
(4x8mm) to fix the chimneys. Shown as in the picture.
5. Put the chimney on the hood, use two screws (4x8mm)
to fix the chimney to the slider duct fixing support.
6. Use the other two screws (4x8mm) to fix the bottom of
chimney.
7. After adjusting the position, open the filter and fix
the body inside with safety screws.
4x8mm
Screw
