7
1.
After evaluating the height of the hood, place the hook
center over installation location.
Drill 3 holes of Ø8mm on
a suitable place to fix the mounting brackets.
INSTALL MOUNTING BRACKETS
2.
Put the drywall anchors into the holes and fix the
mounting screws (4x40mm) into the anchors, and install
the hook on the wall as shown.
INSTALL SLIDERY DUCT, FIXING SUPPORT
1. Calculate the final height of the U-shaped section, drill 2
holes of Ø8mm on a suitable place in line with the slider
duct fixing support.
2. Put the drywall anchors into the holes and fix the
mounting screws (4x40mm) into the anchors, and install
the hook on the wall as shown.
