Routine Maintenance
Take out the primary filter/sponge foam / HEPA filter and they can be cleaned
under the running water. After cleaning, dry them and re-install them .
Primary filter/sponge foam/
HEPA filter cleaning
When the top of the vacuum unit collects dust and fingerprint, you may wipe and
clean it with clean cloth .
Cleaning the Mopping Pad
Top of vacuum unit cleaning
Press the water tank release buckle and take out the water tank, as shown
in Figure 1.
Remove the mopping pad from the velcro, as shown in Figure 2.
Rinse the mopping cloth, dry it, and reuse it. Avoid drying in the sun, as
shown in Figure 3.
Step
①
Step
②
Step
③
24
Do not directly clean the mopping pad with the water tank under the
running water; the water temperature must not exceed 60 degrees;
machine washing is not recommended.
Cle
anin
g And Maint
enan
ce
NOTE:
