www.geeetech.com
Tel: +86 755 2658 4110 Fax: +86 755 2658 4074 - 858
Shenzhen GETECH CO.,LTD
GEEETECH
Step3. Insert the belt into the slot.
*Pay attention to the tooth mesh of the belt and that on the bracket. Tie up both ends
tightly. (This bracket may be a bit different from yours, but it doesn’t matter)
8 Assemble the X-Z axis.
Part ID
Required number
Required parts
NO.69
2
Couplings
NO.4
2
L322 threaded rod
Step1. Fix the two couplings on both of the threaded rod. And plug it on the motor
shaft.
*Mind the opening of the couplings, the larger opening should be connected to the
threaded rods.
