www.geeetech.com
Tel: +86 755 2658 4110 Fax: +86 755 2658 4074 - 858
Shenzhen GETECH CO.,LTD
GEEETECH
Step1. Thread the screw locking ring to both rods respectively. Screw them up
Step2. Thread the two rods into the two X-axis ends.
Step3. Mount the brass nut under both ends with 4 M3 x 16 screws for each.
Step4. Fix the M3x 5 screw on left end. (This is for the Y end stop)
7.5 Mount the X-axis belt bracket on the smooth rods.
Part ID
Required number
Required parts
NO.P3
1
print bracket
NO.54
4
Zip tie
NO.40
2
LM8UU linear bearing
Step1. Mount the print bracket on the smooth rods.
1) Insert the linear bearings into the slot of the bracket as you can see from the
