Shenzhen Getech Technology Co.,Ltd
55
（
Picture 10-5
）
1)
It will pop up the notification
“Err: No Filament”
when the filament is run out during
printing and the printer will stop. See picture (10-6).
（
Picture 10-6
）
And at picture (10-7), if the
“Filament
“shows red, which indicates
“No Filament”
.
（
Picture 10-7
）
2)
Press the extruder handle, remove the remaining filament before loading the new filament.
3)
When the filament is loaded, please use a tweezers to clean the nozzle. Click on the button
in the lower left corner of Picture (10-8) and then it will enter printing information interface.
If the
“Filament”
shows green, which indicates resuming printing. You can click the left