Shenzhen Getech Technology Co.,Ltd
24
（
Picture 7-7
）
2)
Click
“Move”
to its interface, see picture (7-8).
（
Picture 7-8
）
Please choose its precision firstly before moving axes. There are
“30/10/1/0.5/0.1mm”
available.And control every axis moving. Moreover, when the lower
right-hand corner motor status is in the
"Enable"
state, motor is locked. When
“Disable”
releases,
motor is unlocked, you can move every axis by hand.
3)
Click
“Motion Parameter”
, it will enter motion parameter interface. See picture (7-9).