background image

GEDA

®

 Rubbish Chute 

 

 

Assembly and Operating Manual 

Page 11 of 24 

BL041GB Edition 05.2012 

 

Duties of the operating company 

3.1 

Identifying hazards at the place of use 

The operating company must identify all hazards at the place of use 
and must take the necessary health and safety measures. 
 

3.2 

Duty to provide training/qualifications 

The operating company clearly defines the responsibilities of the 
personnel. The operating company is obliged to train all persons 
authorised to use the rubbish chute in the correct handling of the chute 
before using it for the first time, according to the respective area of 
activity and responsibility of the authorised individual and using practical 
exercises.  
Training will cover at least the following: 

  The scope and limitations of the area of activity and responsibility of 

the respective group of people. 

  Safety-conscious conduct. 

  avoiding hazards / conduct in an emergency 

  correct use/installation/dismantling 

  the meaning of the warning signs, notices and pictograms at the 

construction site 

  Use and inspection of the personal protective equipment. 

These instructions must be documented and repeated at regular 
intervals. 
 

3.3 

Lighting/paths 

The filling points and paths for transporting the rubbish to the chute 
must be lit appropriately and secured to safeguard against falls. 

Summary of Contents for COMFORT

























Reviews: